Roller shutter & garage doors across Edenvale. Same-day callout, teams on the ground.

Single-panel, spring balanced

Tip-Up and Up-and-Over Garage Doors in Edenvale

A single rigid panel that tilts up and slides back overhead. Simple, robust, and still the most common door on older South African homes.

Up-and-over tip-up garage door on a residential garage
  • One-piece steel or timber panel
  • Counterbalance spring mechanism
  • Motorisable with the right operator

A tip-up garage door swings out and up in one panel, running back into the roof space on a simple frame. It is the door on a great many older Edenvale houses, particularly through the central suburbs, Eastleigh, Illiondale, Hurlyvale and Harmelia, and it is still a sensible product where the geometry suits it.

Tip-up garage doors we supply in Edenvale

  • Steel tip-up doors in the traditional ribbed and panelled profiles.
  • Aluminium tip-up doors where a lighter panel is wanted.
  • Timber tip-up doors where the house calls for it.
  • Single and double widths, on new or existing frames.

Where a tip-up door works and where it does not

It needs clear space in front of the opening, because the panel swings out before it lifts. On the shorter driveways common in the older suburbs there is frequently not room, and a sectional or roll-up door is the better answer. We will say so rather than fit a door that fouls a vehicle every morning.

Frames on houses that have settled

A tip-up door depends entirely on its frame being square and its pivots level. On housing this age the frame has often moved, and replacing the panel alone will not fix a door that binds. We check the frame for square before quoting, because a new panel on a twisted frame is money wasted.

New panel on an existing frame

Where the frame is sound this is by far the cheapest way to make a tired garage look new, and on the well-built older Edenvale garages the frame frequently is sound. We check the fixings as well as the square before recommending it.

Balance and safe operation

A tip-up door is held by tension on each side, and the balance is the whole safety story. An out-of-balance tip-up door is heavy to lift and can come down hard. We replace the tension components in matched pairs and set the balance so the door stays where you leave it.

Corrosion at the bottom edge

The bottom edge is where these doors die, and on a property that has taken water it happens much sooner. Where the rest of the panel is sound we can often replace the bottom section and specify a better coating on the replacement.

Motorising a tip-up garage door

Tip-up doors can be automated with a rail-mounted operator and the correct arm, but only once the balance is right. Automating a heavy tip-up door is how operators get destroyed. We check the door by hand before quoting the motor.

What a tip-up garage door costs in Edenvale

Usually the least expensive garage door for a given opening. Priced on width, panel material, finish, whether the frame is being replaced, and whether it is automated.

Common questions

About tip-up and up-and-over garage doors

Yes, and we still fit and repair a great many of them. They are the simplest mechanism we build: one counterbalanced panel, few moving parts, and cheap to repair. They remain a sensible choice for a detached garage where sealing is not critical.

That is how the mechanism works — the bottom of the panel arcs outward as it lifts. You need roughly a metre of clear space in front of the door. If you park close to the door, a sectional or roll-up door is the better fit.

Yes, with an operator that has a swing arm or a curved rail to follow the arc of the panel. The springs must be correctly balanced first — a heavy, badly balanced tip-up door will destroy a motor in months.

Almost always the counterbalance springs have fatigued or one has broken. It is a straightforward repair and should be done promptly, because an unbalanced tip-up panel can drop hard enough to injure someone.

Related

Also worth a look

Galvanised Roller Shutter Doors

Hot-dip galvanised roller shutter doors that resist rust in coastal and washdown environments. Manufactured to your opening at our Edenvale works.

Wooden Garage Doors

Meranti, cedar and saligna

Meranti, cedar and saligna garage doors built on a galvanised steel frame and sealed on all six faces before they are hung. Tip-up or sectional, manual…

  • Timber on a galvanised steel frame
  • Sealed all six faces before hanging
  • Tip-up or sectional mechanism

Insulated Garage Doors

Warmer garage, quieter house

Foam-cored sectional garage doors with thermal breaks and full perimeter seals, for attached garages, converted rooms and bedrooms above the garage.

  • 40mm bonded polyurethane core
  • Thermal break at every section joint
  • Full perimeter seals, all four edges

Next step

Get a roller shutter door quote in Edenvale

Tell us the opening size and what the door has to do. We will give you a firm price for Edenvale and a date we can be on site.

Request a callback

Two working hours is our usual turnaround on callbacks.

In a hurry? 076 315 4219

Call now 0861 000 431 Emergency 24 hours Get a quote Free